Installing a standing seam metal roof costs an average of $17,000
Get quotes from up to 3
Enter a zip below and get matched to top-rated pros near you.
A standing seam metal roof costs between $13,600 and $20,400, with an average price of $17,000. Standing seam metal roofs are soaring in popularity with homeowners compared to other types of roofing because they’re lightweight, durable, and easy to maintain. Also known as “raised” or “vertical seam,” it features pleated panels about 12 to 19 inches wide connecting a vertical seam, giving standing seam metal roofing its distinct look.
|Low Cost||Average Cost||High Cost|
Standing Seam Metal Roof Cost Factors
Several factors influence the final cost of your standing seam metal roof, including your roof’s size and the type of metal material you choose.
The larger your roof, the more it will cost to install a standing seam metal roof. At $5 to $26 per square foot, you’ll pay between $500 and $2,600 per 100-foot square of roof.
The material of the metal roofing makes a huge difference in the final cost. Steel roofing can cost as little as $3 per square foot, while aluminum can cost as high as $20 per square foot.
The design is also a significant price factor. There's a big difference between interlocking steel panels and overlapping panels when it comes to cost. Consult a local roofing professional to help you make the right design choice for your project.
Color and Finishes
Most metal manufacturers produce pre-painted metal. The roofers might need to touch up nicks and scratches after installation, but they won't have to paint the roof after it's installed—unless you want them to.
Unless you have a copper roof, you can paint your metal with a wide selection of colors and finishes. Painting a metal roof enhances the curb appeal and keeps the roof in good condition against harsh elements. Be sure to check with your roofer if painting is included in the final price or if you have to pay extra to paint your metal roof.
Removing Old Roof
If you’re replacing an existing roof, you’ll need to remove the old shingles or panels, flashing, and underlayment. Removing an old roof costs approximately $1 to $5 per square foot, or $1,000 to $1,500 on average.
Decking Inspection and Repairs
When replacing a roof, your contractor should inspect the roof decking. If any timbers or framing supports need to be reinforced or replaced, expect additional repair costs.
Your underlayment sits beneath the shingles on top of your sheathing and is typically made of OSB or plywood. It offers extra protection from the elements such as wind, snow, and rain. The cost of labor to put down underlayment ranges from $40 to $80 per hour. Materials could cost anywhere from $100 to $300.
Roof flashing, installed around features such as your chimney, vents, and skylights, keeps water away from critical areas in your home. Flashing replacement typically costs between $200 and $500 per project area.
Installing trim is usually included in a contractor’s roof installation price, but be sure to double-check to avoid any surprise costs.
Cleanup and Disposal
Your roofing contractor may include cleanup and disposal in their fees, but not always. On average, old roof disposal costs between$100 and $800, depending on how much material you have.
To replace and install a roof, expect to pay between $2 to $6 per square foot, or $3,400 to $10,200 for labor. The contractor you hire can make or break your investment. Do your research to ask your roofing contractor questions like whether they’re insured and have similar experience before booking. It’s also wise to vet at least three different contractors before hiring one.
A roofing permit is required when installing a new metal roof. When the installation is done, an inspector should come to look at the work. A permit can cost between $400 to $1,000 for a roof up to 2,000 square feet. Be sure that the roofing company you choose is licensed and insured.
How Much Does It Cost to Install a Standing Seam Metal Roof By Material?
Photo: Natalie Schorr / Adobe Stock
The total material price depends mainly on the type of metal you choose for your standing seam roof, which can range from $3 to $20 per square foot, or $8 per square foot on average. Steel and aluminum are the most popular because of their lower prices and color availability, while zinc or copper are more durable.
Standing Seam Steel
Steel costs an average of $3 to $4.50 per square foot, depending on the metal’s thickness. Steel is the most affordable choice, has a longer life span, and is more fire-resistant than other materials.
Standing Seam Aluminum
The cost runs between $9 to $20 per square foot, depending on the thickness. Aluminum is a good choice if you want a lightweight material. It also cools down quickly and is less likely to rust.
Standing Seam Zinc
The price of standing seam zinc is between $4 to $15 per square foot. Zinc is a low-maintenance material and it naturally resists corrosion.
Standing Seam Copper
The price of seam copper roofing is between $8 and $14 per square foot. Copper is a long-lasting material and can last up to 50 years. It can also develop a classic green patina over time.
How Much Does It Cost to Install a Standing Seam Metal Roof Yourself?
Roofing jobs are best left to the professionals. But if you’re a handy homeowner with prior roofing experience, you can save some money in labor fees by going the DIY route. While you may save $3,400 to $10,200 on labor, you will still risk your safety. You could also void your manufacturing warranty. Also, many roofing contractors use a brake, and essentially manufacture the roof panels on site. This is not generally a tool that you can rent and requires technical skills to use. This is why most homeowners choose to hire a local metal roofing company to install a standing seam roof.
Frequently Asked Questions
You should be aware of the pros and cons of the metal roof before deciding if this is the right choice for your home. The main benefits are that standing seam metal roofs are durable, require little maintenance, and are energy efficient. They don’t bend or crack and can last for 40 to 100 years or more. They also stand up well against termites, rot, and mildew, and provide good insulation.
One con of installing a standing seam metal roof is its complexity—both to install and repair. A professional roofer should install your standing seam metal roof; they should also handle the repairs. Another drawback to this style of roof is that it has a relatively high upfront cost compared to other options—though it is a good investment. Some people also find these roofs to be a little noisy when it rains and hails. Also, extreme weather conditions can affect the lifespan of the roof.
When deciding between a metal roof and asphalt shingles, you should compare both side-by-side to ensure you have the best choice for your home. Asphalt shingles are among the most popular shingles because of their affordable prices, while metal roofing is more expensive upfront. They usually last between 20 and 50 years, depending on the manufacturer, and are versatile, whereas a metal roof will last 40 to 100 years or more.
Standing seam metal roofs require little to no maintenance, but if you install a screw-down metal roof where the fasteners are exposed, the gaskets on the fasteners will dry rot and need to be replaced. Generally, screw-down metal roofs need to be re-screwed every 15 to 20 years.
Metal roofs are energy-efficient and have extended warranties, while asphalt shingles are less durable than most. They tend to lose color and get damaged over time, and absorb heat from the sun.
The average cost to install a standing seam metal roof is anywhere between $24,000 to $42,000 depending on the slope, pitch, and size of your roof. You can expect to pay $8 to $14 per square foot, or $800 to $1,400 per square, installed on a standard sized single story home.What is the life expectancy of a standing seam metal roof? ›
As long as it's properly installed and your attic is adequately ventilated, there's no reason you shouldn't get at least 30 years out of your new standing seam metal roof. Under the ideal conditions, your new standing seam metal roof could live for 50 years.Can you walk on a standing seam metal roof? ›
Standing Seam Metal Roofs – can be easily walked on without damage, but they are steep and slippery. Safety equipment use is a necessity. Corrugated Steel Roofs – are also easily walked on without damage as their installation is done directly to the roof decking.Is standing seam worth the money? ›
The upfront cost is often on the high-end for all types of residential metals roofs. Standing seam is far costlier than a conventional roofing system like asphalt shingles. However, standing seam offers far greater value and will last two to three times longer than a typical asphalt roof.Is standing seam roof worth the money? ›
Advantages Over Traditional Roofing Materials
Even having regular maintenance is a disadvantage in itself. Standing seam metal roofs do not require consistent maintenance. In addition, they have an estimated lifespan of over 50 years and introduce better insulation and watertight sealing compared to roofing membranes.
Noisiness. Metal roofs may be more noisy during a heavy rain or hailstorm than other products depending on the type of decking used during installation (spaced or solid). Adding more attic insulation can sometimes solve this problem, but that may increase costs. Expansion, contraction and fasteners.Does a standing seam metal roof increase home value? ›
A study that was done by Remodeling magazine and published by Angie's List concluded metal roofs renovated with standing seam metal roofing recoup 85% to 95% of the costs. These gains in resale value amount to 1% to 6%, respectively, over homes roofed with asphalt shingles.What are the disadvantages of a metal roof? ›
Other disadvantages of metal roofs are not matters of safety, but also issues of convenience or affordability: Metal roofs can be loud during rainstorms or hail. It's a simple fact that any object falling on a metal roof will be louder than objects falling on an asphalt shingle or wood shake roof.What is the most cost effective metal roof? ›
Corrugated steel panel roofs are the least expensive type of metal roofing, costing about $3.50 to $6.50 per square foot comparable to the price of asphalt shingle roofing. Average costs to install a corrugated steel roof would be from $10,500 to $19,500.Do standing seam metal roofs leak? ›
Actually, when a standing seam metal roof has a leak, it is commonly at some type of flashing area. Failed sealant or butyl tape – Sealants and butyl tape are used to seal out water, dirt, and other debris that could compromise a metal roof. If these are damaged, missing, or applied incorrectly, leaks could occur.
The most effective energy-saving finish for metal roofing is commonly referred to as cool-metal roofing. This highly reflective coating uses cool pigments in the paint to increase solar reflectance and lower the surface temperature of the roof.What goes under a standing seam roof? ›
Underlayment is usually a felt (15 lb, 30 lb, or synthetic) material used over your decking to provide additional protection. That makes it a crucial component to your metal roof. For your standing seam metal roof, your underlayment will be a self-adhering, high heat ice and water shield.Do metal roofs affect WIFI? ›
If your internet service is provided by a cable service or satellite dish, a metal roof will not have any impact on your Wi-Fi signal within your home.What do you put under standing seam metal roof? ›
Felt Underlayment (Asphalt Felt or Tar Paper)
But no matter what you call it, felt underlayment is the most common underlayment material used for steeper-sloped metal roofs. One of the biggest reasons for its popularity is the simple fact that felt underlayment is the cheapest material option.
The most popular misconception about metal roofing is how they can be extremely loud when it rains. This is a complete myth and in fact, they silence any noise created from the elements such as rain, hail, sleet etc.What is the cheapest standing seam metal roof? ›
- National average cost: $29,000.
- Typical price range: $18,000 – $41,000.
- Extreme low end: $8,500.
- Extreme high end: $100,000.
Asphalt Shingle Roofing: Best Overall
Aside from being the most cost-effective roofing option, asphalt shingles are ideal for most climates, offer a reasonable lifespan with proper maintenance, and are relatively easy to install. Asphalt shingles are the most affordable and cost-effective roofing material.
Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing.What is the most economical roof design? ›
The cheapest roof design is a roof with just hips, which are the sloping part, while the gable is the triangular bit on the end of the roof. A lot of subdivisions require a roof with hips and gables (rather than just a hip roof) so that is the most common form of roof construction.Does metal roof make house hotter? ›
Because metal roofs have a low thermal mass, they reflect light and heat rather than absorbing it like asphalt shingles. This means that rather than making your home hotter during the summer months, metal roofing actually helps keep it cool, increasing the energy efficiency of your home.
Despite what you may have heard, metal roofs do not disrupt cell service. That said, this misinformation probably comes from the fact that your metal roof can worsen existing service problems. If a utility tower sits close to a home or business with a metal roof, then you may experience interruptions to your service.Should you have gutters with a metal roof? ›
Overall, it's highly recommended that you install a gutter system with any type of roof, including metal roofing. Gutters help to prevent water-related issues and protect your home from those same issues.How loud is a metal roof when it rains? ›
A metal roof is going to be at least 50 decibels louder than an asphalt roof. If you decide to upgrade and add the insulation boards, you could cut the noise in half. Your metal roof is always going to be louder than the other roof types.Do metal roofs stand up to hurricanes? ›
As discussed above, metal roofs represent an excellent choice in hurricane-prone areas due to their long-lasting, durable, and resistance to damage from high-speed winds. This improved performance means there is a good chance you won't face emergency repairs after the storm.Do metal roofs leak more than shingles? ›
Do Metal Roofs Leak More Than Shingles? If installed incorrectly, metal roofs have the potential to leak more than shingles. However, if you find an experienced contractor who can install it correctly, metal roofs shed snow and ice to prevent moisture buildup.Does a metal roof make your house colder in winter? ›
Metal Roofs Keep Your Home Warm in The Cold Weather
Fortunately, nothing could be further from the truth. According to a study completed by the US Department of Energy, the surface of your metal roof will stay within five degrees of the average asphalt shingle roof, even during the coldest weather.
Generally, metal roofing systems do not require grounding, nor is it required by international building codes.What color is best for metal roof? ›
Muted shades are going to be the best bet here, so stick with things like black, brown, and gray. Blue is also a good option, but don't choose bright shades. Blue exteriors rely on cooler shades, and the roof should complement that color. Blacks and grays are the best choices.What is the longest lasting metal roof? ›
Considered to be the grandfather of metal roofing, copper roofs have been used for centuries around the world. Copper is an extremely long-lasting metal that in ideal environments, can last well over 200+ years.What is the most popular metal roof? ›
The most commonly used metal for residential roofing (for accent purposes and entire roof systems) is steel. Steel comes in 24 or 26 gauge for standing seam metal roof panels.
There are two types of metal roof systems to choose from: standing seam and screw down panel. Remember, both metal roof systems have their place in the roofing industry, but a standing seam metal roof is the best choice for residential purposes.Is it OK to put a metal roof over shingles? ›
Yes, it's possible to put metal roofing over shingles. Before you get started on your project, though, you will need to check with your local building department to see if they'll allow you to. Some areas will only allow re-roofing over one layer of shingles while others will allow over two layers.Do you need an air gap under a metal roof? ›
Research has confirmed that creating an air space under a metal roofing system will increase energy savings during both summer and winter months. A study was funded by the U.S. Department of Energy and conducted by the Oak Ridge National Laboratory to document energy savings of metal versus asphalt roofs.Do metal roofs attract lightning? ›
Extensive research has proven that metal roofing is no more likely to attract a lightning strike than any other type of roofing material. In fact, as a non-combustible material with the highest Class A fire-resistance rating, metal roofing is one of the best materials for homes in lightning-prone regions.Is a metal roof tax deductible? ›
American Metal Roofs offers several roofs that qualify for energy efficiency tax credits. Congress has renewed the 25C residential energy efficiency tax credit through 2022*. Not all metal roofs qualify. This tax credit is for ENERGY STAR certified products that use up to 30% less energy in your home.What color metal roof fades the least? ›
What Color Metal Roof Fades the Least? Lighter colors – tans, whites, and grays – fade far less than darker, more saturated colors. You can also invest in a protective coating that buffers the roof from mildew, moisture, and sun to combat fading.What is the best color of metal roof for energy savings? ›
The most energy-efficient metal roof color is anything in a light shade. Lighter colored metal roofs reflect more heat than darker colored metal roofs, reducing your energy costs in warmer months.Does standing seam roof need drip edge? ›
If you are installing a metal roof, a drip edge is not required, especially if the roof is at a slant and installed to hang over an inch. Doing this will help direct the water away from the fascia. However, while it's not necessary to have a drip edge, it is often highly recommended anyway.Does standing seam roof need ventilation? ›
Regardless of the material used to cover your roof, it's a good idea to let your roof breathe by taking advantage of a well-designed ventilation plan. This includes making sure there's a proper balance of intake vents for fresh air to enter from below, along with exhaust vents so hot air can exit from the top.Can you use Tyvek under a metal roof? ›
DuPont Tyvek Protec 120 Roof Underlayment is an engineered synthetic roofing underlayment with industry-leading walkability. It is ideal for slopes 2:12 or higher and can be used under a variety of roofing materials, including asphalt shingles, cedar or metal roof cladding.
Metal Roofing and Wi-Fi
The best way to assure that your Wi-Fi is strong in a home with a metal roof is to use a dish or satellite based provider. Since the signal is captured on the exterior of your home with these types of providers, it will not be affected by a metal roof.
Metal roofs are not noisy. In reality, they can be quieter than your typical asphalt shingles. In addition to serving as a great line of defense against noise pollution, metal roofs are also energy efficient and eco-friendly.Do cell phones work under metal roofs? ›
Many people ask if a metal roof could be the cause of their poor cell phone reception at home. Well, the short answer is no, it isn't! There is no evidence that a metal roof disrupts the signal for your phone any more than another material.Is plywood necessary under metal roof? ›
Some might choose to skip using underlayment to save money. However, the metal roof underlayment acts as an added layer of protection. You can save money by using underlayment because it will help you avoid problems that would need to be fixed. The short answer is yes, your metal roof does need underlayment .What goes between the metal roof and the plywood? ›
The longer answer is that when metal roofing is installed, it is always best to use a roofing felt layer between the metal roofing and the bare plywood. This should always be used as a bare minimum, but some people also choose to add an extra layer with a slip sheet that can also help safeguard the felt sheet.Is it cheaper to put metal roof over shingles? ›
No matter which you choose, it's not going to be cheap. With that in mind, a metal roof will always be more expensive than shingles. Not only do the metal panels themselves cost more than asphalt shingles, but a metal roof also requires more skill and labor to install.Why is standing seam more expensive? ›
Consequently, standing seam panels install more slowly than exposed fastener panels, and additional contractor labor is also a factor in their higher cost.
We'll get right to the point–no, metal roofs are not loud in the rain. Preventing sounds from hitting hard, flat surfaces is key to noise reduction. A flat, uncoated sheet of metal–like the smooth surface of a drum–has no way to shorten the prolonged sound reflection, known as reverberation.Do metal roofs make a home hotter? ›
Because metal roofs have a low thermal mass, they reflect light and heat rather than absorbing it like asphalt shingles. This means that rather than making your home hotter during the summer months, metal roofing actually helps keep it cool, increasing the energy efficiency of your home.What is the cheapest metal roofing? ›
Corrugated steel panel roofs are the least expensive type of metal roofing, costing about $3.50 to $6.50 per square foot comparable to the price of asphalt shingle roofing. Average costs to install a corrugated steel roof would be from $10,500 to $19,500.
In fact, countless homeowners and businesses have installed metal roofs due to their many benefits and have no issues with their internet connections. Not only will a metal roof not block your wi-fi signals, but you also won't have trouble with cell phone reception, either.