Grip-Rite 34 deg Metal Connector Nailer (2023)

Certain product categories and brands are not eligible for promotional discounts or coupons. Some brands have pricing policies that restrict the prices that Ace may sell or advertise their products. The following is a list of brands and categories that are generally excluded from promotions, discounts or coupons. This list below may not be exhaustive and may change from time to time. If you have questions, please contact the Customer Care Center.

Ace Rewards Instant Savings amount is available to Ace Rewards members who are logged into acehardware.com (and have previously linked their Ace Rewards account). Discount shown in cart. Where applicable by law, tax is charged on the sale price before application of Instant Savings. Instant Savings are valid through date advertised. Limit refers to number of items at the advertised price.

Freeassembly and delivery on grills/accessories $399+ for Ace Rewards members.
Free Assembly & Delivery on grills & grilling accessories totaling $399+for Ace Rewards members. Online and at participating Ace locations. Deliverydates subject to availability within local delivery area only. Offer not validon prior purchases. Excludes Char-Broil. Valid from 2/1/2023 through 2/28/2023.

Mix& Match - Buy 2, Get $1 Off select Diamond Crystal or Morton Salts
Valid In-store & Online. Mix & Match - Buy 2, Get $1 Off select DiamondCrystal® or Morton® Water Softener Salt Pellets, Crystals or Pool Salt, 40 Lb(SKUs# 7036692, 7036726, 7222144, 7222243, 7222375, 7225246, 7036718). Validfrom 2/1/2023 12:01 am CST to 12/28/2023 11:59 pm CST.

Buy aM18 Fuel Combo Kit Get a M18 battery
Valid online and Instore. Buy a Milwaukee M18 FUEL 18 V Cordless Brushless 2Tool Combo Kit (2026543), get a Milwaukee M18 REDLITHIUM XC8.0 18 V 8 AhLithium-Ion High Output Battery Pack 1 pc (2883874) free. Must add both itemsto cart to receive offer. Discount reflected in cart. While supplies last.Valid from 2/1/2023 12:01am CST to 2/28/2023 11:59pm CST.

Buy an2 M12 Batteries and Save $59
Valid online only. Buy (2) 2028275 Milwaukee M12 12 V 2.5 Ah Lithium-Ion HighCapacity Battery Pack 1 pc and Save $59Must add both items to cart to receive offer. Discount reflected incart. While supplies last. Valid from 2/1/2023 12:01am CST to 4/30/2023 11:59pmCST.

Buy anM12 Radio Get M12 Battery Free
Valid online only. Buy a (2008998) Milwaukee M12 Wireless Bluetooth WeatherResistant Radio + Charger, get a (2472405) Milwaukee M12 REDLITHIUM CP 12 V 2Ah Lithium-Ion Battery Pack 1 pc free. Must add both items to cart to receiveoffer. Discount reflected in cart. While supplies last. Valid from 2/1/202312:01am CST to 4/30/2023 11:59pm CST.

(Video) Helps You Frame Faster! Bostitch MCN-150 StrapShot Metal Connector Nailer REVIEW

Buy aM12 Pin Nailer Get M12 Battery Free
Valid online only. Buy a (2016723) Milwaukee M12 23 Ga. Finishing Pin Nailer,get a (2472405) Milwaukee M12 REDLITHIUM CP 12 V 2 Ah Lithium-Ion Battery Pack1 pcfree. Must add both items to cart to receive offer. Discount reflected incart. While supplies last. Valid from 2/1/2023 12:01am CST to 3/26/2023 11:59pmCST.

Buy anAccessory Get 20% off an M18 FUEL Kit
Valid online only. Buy a Milwaukee Accessory (2555449,2814093,2554673,2809580),get a 20% off an M18 Fuel Kit (2026768,2026770,2026877) Must add both items to cart to receive offer.Discount reflected in cart. While supplies last. Valid from 2/1/2023 12:01amCST to 4/30/2023 11:59pm CST.

Buy anM18 Impact Driver Get a M18 Bare Tool Free
Valid online only. Buy a (2013723)Milwaukee M18 18 V 1/4 in. Cordless BrushlessHydraulic Impact Driver Kit , get a M18 BareTool(2026875,2026769,2550465,2024127) free. Must add both items to cart toreceive offer. Discount reflected in cart. While supplies last. Valid from2/1/2023 12:01am CST to 4/30/2023 11:59pm CST.

FAQs

What is a metal connector nailer used for? ›

This small and compact metal connector nailer fits easily between rafters and joists and the nosepiece design leads with a metal point for accurate nail placement into prepunched holes. design leads with a metal point for accurate nail placement into prepunched holes.

Is there a nail gun for joist hangers? ›

The GR150 1-1/2-Inch joist hanger/connector plate nailer features multi blow functionality for dramatically increased safety. By driving the fastener 20-30 times per second the likelihood of ricochets and bent nails is virtually eliminated.

View Details ›

Does Milwaukee make a cordless joist hanger nailer? ›

The MILWAUKEE M18 FUEL 30 Degree Framing Nailer sets the new standard for cordless framing nailers. By leveraging a nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, this nailer provides users with pneumatic performance and the convenience and freedom of cordless power.

Explore More ›

Is there a nail gun for steel? ›

Steel pin nailers are engineered for fastening a wide range of applications to concrete and steel. These steel pinners can also be used for furring strips, wire lath installation, steel banding, and much more.

View Details ›

Why would you use a 23 gauge pin nailer? ›

When it comes to delicate moldings or pre-finished trim, pros will often switch to a 23-gauge pin nailer. In these applications, an 18-gauge has the tendency to split the wood, especially hardwoods, or leave unsightly marks.

Get More Info Here ›

Is it better to screw or nail joist hangers? ›

Nails do matter.

Using 3-1/2 in. long 16d nails to secure a hanger to a wall ledger gives you added strength. The long nails bite into the framing members behind the ledger for maximum holding power.

Why do builders use nails not screws? ›

Nails are a favorite for large jobs in construction because they're cheaper than screws and offer shear strength — or the ability to withstand shear pressure, where two surfaces slide past each other.

Keep Reading ›

What is the most common mistake made when installing joist hangers? ›

Never nail straight into the end grain, which would result in splitting the wood. Nailing into the end grain would eventually lessen the nail's holding power, even if the wood didn't split, even if you can't see the split.

Know More ›

What degree nail gun is best for framing? ›

A 21-degree nailer is a versatile and powerful tool that can be used for various applications. It is most commonly used for framing, decking, siding, and sheathing. The 21-degree angle allows for thicker nails to be used, as well as long nails.

Tell Me More ›

What's better 21-degree or 30 degree nailer? ›

However, longer projects may be difficult to handle due to their weight. While 30-degree nailers are more adaptable and may be used for smaller work around the house, 21-degree nailers are better suited for building projects.

Know More ›

Why can't you use screws in joist hangers? ›

Joist hangers (and hurricane clips) are intended to be attached with nails or, in some cases, a specialty screw. Deck screws - like this - are not acceptable. These hangers are actually engineered elements, and as such, must be attached according to the manufacturer's instructions.

Learn More Now ›

Will a Hilti gun go through steel? ›

No through penetration or damage to the back of the steel

With Hilti blunt-tip technology, fastenings can be completed without damaging the protective coating for steel as thin as ¼”, making it ideal for highly-corrosive environments.

Read The Full Story ›

Can you nail into steel studs? ›

Most nails and screws never penetrate through metal studs. Drilling a hole is needed. If you are mounting anything heavy on the wall you will probably need to mount it to the wall studs. You need to drill pilot holes first before fixing in any screws.

Read The Full Story ›

What's the difference between iron and steel nails? ›

Iron nails are the most common and are suitable for wood, textiles and leather. Steel nails are more suitable for building materials (concrete, bricks…). In particular, galvanised steel is the best choice for outdoor work because it offers excellent resistance to atmospheric agents and does not rust.

What is the most common gauge nail gun? ›

16-gauge nails are the most versatile size, so a 16-gauge nail gun is a great option if you need it for many different projects. 15-gauge nails are most often used for installing thick trim.
...
The most common nail gauge options for nail guns are:

15-Gauge.
16-Gauge.
18-Gauge.
23-Gauge.

Are pin nailers worth it? ›

Advantages of a Pin Nailer

The small diameter of pin nails rarely causes wood to split, making them a great choice for attaching delicate pieces of wood trim and thin pieces of wood veneer. Another benefit is pin nail holes are nearly invisible and don't require wood filler.

What is the difference between 16 vs 18 vs 23 gauge nails? ›

The difference between them is the gauge nail that they shoot. The most common and readily available types are 15 gauge, 16 gauge, 18 gauge, and 23 gauge. The higher the number, the thinner the nail and the smaller the hole.

Know More ›

Should you nail every hole in a joist hanger? ›

Standard joist hanger connection

Nails placed in all holes guarantee full load capacity. Unless specified otherwise by the designer, always use full nailing.

How much weight can a 2x6 joist hanger hold? ›

Joist Hanger Vertical Capacity

Joist Size	Min Capacity lbs
2x6	400
2x8	500
2x10	600
2x12	700

Can I use 2x6 joist hangers for 2x8? ›

Usually, the hanger size is the same as the joist size, but you can use a hanger that is one dimensional size less than the joist depth—a 2x6 hanger can be used with a 2x8 joist, for instance. Keep in mind that the load capacity of the smaller hanger needs to be adequate to support the load on the joist.

Do framers still use hammers? ›

Framing hammers have increasingly been replaced by nail guns for the majority of nails driven on a wood-framed house.

Is smooth shank better than ring shank? ›

Nail Shank Types

The downside of a smooth shank nail is its loss of withdrawal strength when applied in wood that is continuously expanding and contracting due to moisture. Ring and screw shanks have a stronger holding power than smooth shanks. In general, ring shanks have the strongest holding power.

Keep Reading ›

What is the shear strength of a 16 penny nail? ›

134 lb.

Get More Info ›

What is the 1 3 cantilever rule? ›

Cantilever: The cantilever is the overhang of the deck beyond the supporting beam. The 1/3 rule is among the common theories applied in the industry but it is not a building code. According to this rule, for every foot of joist length from the house to the beam, there can only be 1/3 of that amount overhang the beam.

See Details ›

Where should you not drill holes in joists? ›

You can put holes in floor joists anywhere along the length of the joist, but you can't put them any closer than 2″ from the top or bottom edge of a joist. The maximum size of a hole is 1/3 the depth of the floor joist.

Discover More Details ›

Can you use structural screws instead of joist hangers? ›

The best things to use to attach the joist hangers to the beam are structural screws or bolts. Never use roofing nails. I've seen people do this. You can buy structural nails that are rated for the weight, but trust me, the structural screws or bolts are far better.

Get More Info Here ›

Will 30 degree framing nails work in a 34 degree gun? ›

The 34-degree framing nailer has a 30-degree opening angle, which makes it popular with users. Now the question is, can I use 30-degree nails in a 34-degree nailer? Yes, you can drive 30-degree nails with a 34-degree nailer.

Learn More Now ›

What nails do framers use? ›

Nail size is more important than you might think when framing interior walls. Nails that are too long or fat are difficult to drive and can split wood, while short or thin nails just don't do the job. The best nails for framing are 3 1/2 inches long. These are called 16-d, or "16-penny," nails.

Why do framing nailers have different degrees? ›

This framing nailer magazine angle typically varies between 20-22-degrees, depending on the manufacturer. Generally, a three-degree variance allows the user some leeway in angle clearance. Similar to the 15-degree coil nailers, the 21-degree framing nailer drives a full-round head nail.

See Details ›

What size nail gun is best for quarter-round? ›

If you're doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job.

Learn More ›

What is stronger brad nailer or finish nailer? ›

The brad nailer uses a smaller nail, which provides a smaller nail hole to fill, but also is less strong. The finish nailer uses a larger nail with a head, which provides a larger nail hole to patch, but is a stronger connection.

Get More Info ›

What is the advantage of an angled nailer? ›

Being able to tilt the front of the machine backwards prevents the front of the tool from hitting the workpiece, so it allows nails to be fired into tight corners or close to the floor. This would be impossible if you were using a straight nailer, and it is in these applications where an angled nailer is invaluable.

Get More Info Here ›

How far should screw go into stud? ›

The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw's diameter, or gauge.

Get More Info Here ›

Is it OK to use screws instead of nails for framing? ›

Nails are often preferred for structural joining, including framing walls, because they are more flexible under pressure, whereas screws can snap. Nails are also called upon when securing plywood sheathing for exterior walls, installing hardwood floors, and attaching siding and roofing.

Explore More ›

What are metal connectors used for? ›

What types of applications are metal connectors used in? Metal connectors are mainly found with machinery used in various fields like; power distribution, meteorological observation, construction, machine tooling, communication infrastructure.

Read On ›

What is a connector nail? ›

CNA nails are annular ring shank connector nails with a conical shape under the head. These nails are recommended for structural assemblies and installation of Simpson Strong-Tie connectors to timber, in order to obtain the published load bearing capacities.

Get More Info Here ›

What are the different nailers used for? ›

Different types of nail guns can be used with different nail lengths. A typical brad nailer, for example, shoots nails that are 3/8 inch to 1 1/4 inches in length, while a larger framing nailer typically shoots nails from 2 to 3 1/2 inches in length. For woodworking projects, a brad nailer is a good choice.

Learn More ›

When should I use a pin nailer? ›

What would you use a pin nailer for? Pin nailers are ideal for attaching workpieces where larger nails could split the wood, like installing delicate or tiny pieces of trim and thin veneers. They're also useful when you need to tack a workpiece in place temporarily.

Tell Me More ›

What are the 3 types of connectors? ›

Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.

Learn More ›

What are the most commonly used connectors? ›

The most common connectors, and the ones used most frequently in speech, are and, but, or, because, so and then, and with them you can express most ideas quite well.

Discover More Details ›

What are the three types of nailing? ›

There's more than one way to hammer a nail. Several techniques are commonly used, with each suited to different applications.
...
Nailing Techniques

FACE-NAILING. This is the rudimentary nailing we learned first. ...
TOE-NAILING. ...
DOVETAIL NAILING. ...
BLIND NAILING. ...
CLINCH NAILING.

Mar 25, 2021

Get More Info Here ›

Which nails can be used in connectors? ›

There are two types of connector nails available, the Strong-Drive SCNR Ring-Shank Connector nail and the Strong-Drive SCN Smooth-Shank Connector nail. “SCN” stands for Structural Connector Nails. “R” refers to ring-shank nails.

What is the most versatile nailer? ›

16-gauge nails are the most versatile size, so a 16-gauge nail gun is a great option if you need it for many different projects. 15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.

Read On ›

What is a good all around nail gun? ›

Top 6 Nail Guns

Best Roofing Nailer: Metabo HPT Roofing Nailer.
Best Brad Nailer: DEWALT Brad Nailer Kit.
Best Framing Nailer: NuMax Pneumatic Framing Nailer.
Best Cordless Nailer: PORTER-CABLE Cordless Brad Nailer Kit.
Best Starter Kit: BOSTITCH Air Compressor Combo Kit.

More items...

Why does my pin nailer keep jamming? ›

If your tool is jamming frequently, make sure you are using the correct fastener and collation type for your tool. If you have been using the wrong fasteners, clear the jam and switch to the correct nails. If your tool is driving nails, but they're not sinking fully, the tool likely isn't getting enough air.

Keep Reading ›

Can you put Brad nails in a pin nailer? ›

Brad nailers and pin nailers are both nail guns used for small to medium-sized projects. However, these tools are not interchangeable.

Keep Reading ›

Grip-Rite 34 deg Metal Connector Nailer (2023)

FAQs

What is a metal connector nailer used for? ›

Why can't you use screws in joist hangers? ›

Do framers still use hammers? ›

What is stronger brad nailer or finish nailer? ›

What are the three types of nailing? ›

Videos