21 Best carpenters tool belts | Leather vs polyester? [2022] (2023)

Best carpenter’s tool belt

#1 Best carpenter’s tool belt

Occidental leather 5089 22 pockets 29 to 54 inches belt, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (1)

  • Made of high-quality top-grain leather.
  • The main bags are reinforced with copper rivets.
  • Has a “no-spill” tool holder system that keeps tools in place.
  • The main pouches tend to slide off when you remove the belt.

CHECK CURRENT PRICE

#2 Best beltless tool belt

Occidental Leather 5093, 25 pockets, beltless framer bag

21 Best carpenters tool belts | Leather vs polyester? [2022] (2)

  • Has wide padded shoulders that provide adequate support.
  • Has a Dri-Lex lining that wicks away sweat.
  • Has a total of 25 pockets and tool holders.
  • Designed primarily for right-handed users.
  • Can be bad for your back.

CHECK CURRENT PRICE

#3 Best Builders top-grain leather tool belt

Estwing 94746 14 pockets, 30 to 52 inches, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (3)

  • Made of 100% top-grain leather for rugged durability.
  • Has three hammer loops.
  • Had large and small pockets, tool loops, and a hammer holder.
  • The belt could use more holes if you are skinny.

CHECK CURRENT PRICE

#4 An oil-tanned leather tool belt

OX ToolsOX-P263604 22 pockets, 29 to 37 inches belt, leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (4)

  • Comfortable enough to wear even for long periods.
  • Has a rugged 4-piece framing rig.
  • The pouches have low-profile heavy-duty rivets.
  • Made of high-quality oil-tanned leather.
  • The bags move out of place when you take the belt off.

CHECK CURRENT PRICE

#5 Best trade tool belt

Occidental Leather 5530, 28 pockets, 36 to 39 inches, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (5)

  • Made of premium quality top-grain leather.
  • Has 28 pockets and tool holders.
  • Equipped with an Oxy tool shield.
  • The smaller pouches are too small, while the larger ones are a bit too big.

#6 Most balanced leather tool belt

Occidental Leather 5191 LG Pro, 22 pockets, 37 to 44 inches, top grain leather tool belt

  • 21 Best carpenters tool belts | Leather vs polyester? [2022] (6)
  • Has a unique one-piece design that hugs the body and distributes weight evenly.
  • Made of premium quality top-grain cowhides.
  • Tanned with a blend of oils and waxes that protect the material against the elements.
  • The fixed bags make it difficult to attach a suspender system.
(Video) Best Tool Belt 2022 | Top 5 Tool Belts

#7 Best nylon-leather tool belt

Occidental Leather 8580 28 pockets, 29 to 54 inches, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (7)

  • Has 28 pockets.
  • Remains remarkably lightweight even when the pockets are full.
  • Has a convenient speed square slot.
  • Excellent build, made of high-quality materials.
  • Can stain your clothes when you get sweaty.

#8 An adjustable tool belt system

Occidental Leather 8089, 22 pockets, 29 to 54 inches belt, nylon/ leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (8)

  • Adjustable design makes it wearable by people of all sizes.
  • Has 22 pockets.
  • The unique design ensures proper fit and prevents pants from falling.
  • Gets a bit heavy.

#9 A deep-pouched leather tool belt

Occidental Leather 9850, 24 pockets. 32 to 41 inches belt, nylon/ leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (9)

  • Has 10-inch tough built tool pouches with boots made of leather.
  • Adjustable from 32 to 41 inches.
  • Pockets have a leather “Fat Lip” feature that keeps the bag open.
  • A bit stiff at the start.
  • Pouch movements are a bit restricted.

#10 Another nylon-pouched leather tool belt

Occidental Leather 9855 24 pockets, 32 to 41 inches belt, nylon/leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (10)

  • Features the unique “Fat Lip” bag design that ensures easy access.
  • Made of industrial-strength nylon with leather reinforcement.
  • Has pre-installed D-rings for use with suspension systems.
  • The pockets are a bit too deep.

#11 Most comfortable belt system

DeWalt DG5472 12 pockets, 29 to 46 inches, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (11)

  • A comfortable and easy-to-wear belt measuring 2 inches wide.
  • Has a double-tongue roller buckle that enhances stability.
  • Has a swinging “snap-in” hammer holder.
  • Has five main pockets and seven smaller pockets.
  • The front tape measure pocket of this DeWalt tool belt is a bit too small for standard tape measures.

#12 The Latutus tool belt system

Lautus 15 pockets, 30 to 56 inches belt, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (12)

  • All the pockets are adjustable for optimum comfort and convenience.
  • Has reinforced double-stitched seams.
  • Made from 100% quality leather.
  • The left pouch is a bit too small and rides pretty low.

#13 A tool belt for larger waists

CLC 21448X 17 pockets, 47 to 55 inches belt, leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (13)

  • Has a 4-piece design for maximum convenience and portability.
  • Made of top-grain leather for heavy-duty use.
  • Comes with two easy-carry pouches and 17 pockets.
  • The tape clips aren’t really that useful.
(Video) Top 7 Best Carpenters Tool Belt [Review] - Heavy Duty Construction Tool Belt [2022]

#14 An affordable leather tool belt

CLC 21448 15 pockets, 29 to 46 inches belt, top grain leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (14)

  • Unique handle design allows for easy adjustment.
  • Can be carried and stored without the contents falling out.
  • Has 5 main pockets for tools and 10 smaller pockets for accessories.
  • The leather material takes a long time to break in and soften.

#15 Durable Lautus tool belt

Lautus 11 pockets, 30 to 26 inches belt, genuine leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (15)

  • Fits waist sizes from 30 to 46 inches.
  • This tough-built tool belt is crafted for rugged reliability with high-quality materials.
  • Could use more pockets
  • You may need to cut off extra material to keep it from flapping around.

#16 Best cowhide leather tool belt

Leather Gold 3450 10 pockets,30 to 45 inches belt, genuine leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (16)

  • Made of authentic 2.0 mm gauge cowhide leather.
  • Rugged yet comfortable.
  • Has 10 easy-reach pockets and three hammer hangers.
  • The two belt prongs tend to flop around when putting on the bags.

21 Best carpenters tool belts | Leather vs polyester? [2022] (17)

  • Has adjustable padded suspenders that improve weight distribution.
  • Has 20 pockets for tools and accessories.
  • Combines a padded belt design with a double-tongue roller buckle.
  • Has large, gusset-style pockets that allow for easy tool access.
  • The plastic that holds the suspender straps together is a bit flimsy.

#18 An ergonomic tool belt system

Gatorback B145 14 pockets, 36 to 40 inches belt, nylon/ leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (18)

  • This Gatorback tool belt is made with high-quality memory foam.
  • Ergonomic design for optimum support and comfort.
  • Has built-in air-channels that reduce heat.
  • The pockets are a bit too stiff and deep.

#19 DIY CLC polyester tool belt

CLC 2605 20 pockets, 29 to 46 inches belt, polyester tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (19)

  • Has a total of 20 pockets, sleeves, and holders.
  • Unique design allows for quick and easy adjustment.
  • Has gussets that allow for easy tool access.
  • The position of the tape measure holder prevents access to some slots.

#20 A systematic five-pocketed tool belt

McGuire 5 pockets, up to 50 inches belt, oil-tanned leather tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (20)

  • Accommodates a wide variety of waist sizes.
  • Breaks in fairly quickly and holds up well.
  • The material isn’t top-grain leather.
  • It’s a bit uncomfortable.
(Video) Best Tool Belts Reviews 2022 [Top 5 Picks]

#21 A cheap tool pouch polyester belt

Bucketboss 50200 12 pockets, up to 52 inches belt, polyester tool belt

21 Best carpenters tool belts | Leather vs polyester? [2022] (21)

  • Can accommodate waist sizes up to 52 inches.
  • Made of durable polyester.
  • Has barrel-bottomed pouches for extra capacity.
  • The bags tend to sag over time.

What makes a worthy tool belt?

The best carpenter tool belt allows you to carry a wide assortment of tools and accessories without having to use your hands.

Most have two large side pockets and several smaller pockets that give you ample space to carry everything you need for the task at hand.

With a particularly well-designed tool belt, you should be able to reach for the tool you need without having to stop to think about it.

In this way, a tool belt will help speed up your workflow and allow you to work more efficiently.

Carpenter’s tool belts can be used by builders, construction workers, and woodworkers.

It’s a must-have for anyone who needs quick access to tools for DIY work; be it attachingwood to concrete,installing a bike high on a wall or ceiling.

21 Best carpenters tool belts | Leather vs polyester? [2022] (22)

Reasons to buy a carpenter’s tool belt

  • Organization. A tool belt will help you keep your tools organized, especially when your collection of
    tools increases.
  • Convenience. Having a tool belt will allow you to retrieve the particular tool you need quickly.
  • Efficiency. Having ready access to your tools will enable you to work more efficiently.
  • Safety. Tool belts help keep you protected from sharp blades and pointed ends.
  • Safekeeping. Tool belts help prevent the loss of your tools and accessories.

Things to look for a carpenter’s tool belt

  • Material. The material will affect the durability and comfort of your tool belt. Leather and suede are the most popular options among the pros.
  • Carrying options. A tool belt should have an abundant variety of carrying options, including the right number and sized pockets and hammer loops.
  • Pocket placement. It is equally important to consider pocket placement, which affects tool access, and the ease by which you could climb ladders and move around.
  • Adjustability. Your tool belt should allow for size adjustment.
  • Cinching Style. The best tool belt also lets you distribute the weight to your shoulders via shoulder straps.

21 Best carpenters tool belts | Leather vs polyester? [2022] (23)

The best material for a tool belt

Tool belts can be made of leather, suede, polyester, nylon, or canvas. For my money, leather is the best material as it provides the most protection against pointy tips and sharp edges. Suede provides similar protection, although leather is generally a lot more durable than suede.

You can make do with a canvas or multi-layered polyester tool belt for casual work. But if there is a chance that you will get more serious about building or DIY work, I suggest buying a leather tool belt at the outset.

Do you need shoulder straps?

Many tool belts have shoulder straps, and they often seem like a good idea.

After all, anything that takes some weight off your waist is a good thing, right?

But the fact is that shoulder straps aren’t absolutely necessary for tool belts.

In fact, they can even cause you to slump over time, as the weight is now putting more pressure on your spine.

It’s a good idea to mix it up, and always keep your tool apron as light as possible by only holding the tools you need for each task as you doing it.

21 Best carpenters tool belts | Leather vs polyester? [2022] (24)

What makes a leather tool belt perfect for builders?

A leather tool belt is a perfect choice for most builders. It is durable and comfortable, with sufficient weight but not too heavy.

The material also provides adequate protection against sharp points and edges from your other tools and prevents damage to tools as well. With care, a good leather tool belt should last what you paid for it.

Alternatives for a tool belt

A tool belt is a requirement for tradespeople to do their job and nice to have around for DIY, but there are other alternatives for DIY’ers. You could use a portable or a Milwaukee rolling tool bag to hold and transport most of your tools, for instance.

You could then use a woodworker’s apron to have the tools that you frequently use close by. The best woodworking apron allow you to attach or remove the shoulder straps as needed.

Of course, a tool bag is a lot more cumbersome than a tool belt strapped around your waist. If you need a hands-free solution, a tool belt is still the best way to have your tools ready to go.

Tools you need to fit in a tool belt

The tools that you carry in your tool belt will depend on your personal preferences and the type of work you need to do.

Most belts are designed to carry a lot of tools, but that doesn’t mean that you should fill it to capacity.

Keep in mind that the weight can quickly add up, so you will want to plan out what exactly you will carry in your tool belt.

Most situations require an impact drill, so make sure you have space for that.

You will probably need a nail gun frequently as well, so get a leather belt that is strong enough to handle the load on your strap.

Tools to make sure will fit are:

  • Hammer
  • Tape measure
  • Ruler
  • Pencils and pens
  • Square
  • Chisels
  • Pliers
  • Utility knife
  • Nails and screws
  • Drill bits
  • Sandpaper
  • Nail punches

Choosing the top carpenter’s tool belt

#1 Top carpenter’s tool belt

The Occidental 5089 is the most expensive tool belt in this roundup, but there are many good reasons for its price.

Everything about it reeks of quality, from the top grain leather material to the generously sized pockets and tool holders.

There are no less than 23 pockets on board, all of which will securely hold your tools, accessories, and anything else you may need at a worksite.

(Video) What Should You Carry In Your TOOL BELT?! (These Are The Best Tools For Carpentry / Construction!!)

The 5089 is designed to withstand the rigors of the road and holds up even under the most rugged conditions.

It also has a ‘no-spill tool holder system that keeps your tools in place.

#1 Nylon tool belt

The Occidental 8580 is an absolute monster of a tool belt with a staggering 28 pockets.

With these many pockets on board, you can be sure that you will have all the tools you need for most construction and repair tasks.

Even with all the pockets filled, the 8580 remains pretty easy to handle and transport.

The build is excellent, and you get the impression that it is made of high-quality materials.

#1 Best value carpenter’s leather tool belt

The OX-P263604 from OX Tools is one of the best values in the tool belt market, with a superb combination of quality, convenience, and features.

With 22 pockets available, you have more than enough space to carry your most essential tools plus several other accessories besides. It even has three hammer loops that will accommodate tools such as a Stiletto titanium hammer . And with low-profile rivets securing each pocket, the OX-P263604 is built to last.

#1 Best value polyester tool belt

DeWalt’s DG617 is a handy tool belt made of durable polyester, giving it the ability to withstand the most rugged environmental working conditions.

The DeWalt tool pouch has large, gusset-style pockets that increase the holding capacity, giving you access to your most-used tools.

You won’t have to worry about lugging too much weight, as this DeWalt tool belt has padded suspenders that let your shoulders bear some of the load, effectively distributing the load.

#1 Most affordable leather tool belt

The DeWalt DG5472 is the most affordably-priced tool belt in this roundup, but it more than measures up to its higher-priced counterparts. Designed for utmost durability and rugged reliability, it is made of top-grain leather that holds up under even the most demanding conditions.

This DeWalt leather tool belt is two inches wide and has a hammer holder that lets you snap in your favorite striking tool such as your best Estwing hammer .

Things to consider before buying a tool belt

  • Durability. Your tool belt should be able to withstand the demands of the job. It should hold up in rugged environments and be resistant to heat, moisture, dust, mud, and oil.
  • Cinching style. The cinching style will have a lot go to do with how well you adjust to using your belt. If you have a back condition, you should consider a belt that distributes some of the weight to your shoulders.
  • Brand. Occidental makes some of the best tool belts on the market. You should also look into an Estwing, Ox Tools, and DeWalt carpenter tool belt, all of which provide excellent value for the money.
  • Price. Consider the price of your tool belt as well. Although you will understandably want to save a few bucks, steer clear of budget belts that won’t hold up to rugged use.
  • Tool weight. Consider the type of tools you will carry and how heavy they are. You will want a tool belt made of a rugged material that can carry the weight. But you also want a good distribution of weight.
  • Jobs. Finally, make sure that your tool belt is well suited for the job you are trying to do. Some designs are best used as a roofing tool belt. A leather carpenters tool belt might be overkill for home DIY work, but it might be perfect for heavy-duty DIY’ers.

21 Best carpenters tool belts | Leather vs polyester? [2022] (30)

21 Best carpenters tool belts | Leather vs polyester? [2022] (31)

Tips for using a carpenter’s tool belt

Dos

  • Keep the main pouch by your dominant hand.
  • Keep essential tools and accessories in the quick access pockets for easy retrieval.
  • Keep fasteners and small objects in secondary pouches.
  • When you’re working with chisels, install a magnet in your belt to prevent them from falling out.
  • Use a cordless blower to clean out your apron regularly from sawdust.

Don’ts

  • Don’t fill up all your pouches to avoid confusion and clutter.
  • Don’t bring too many tools to keep the weight manageable.
  • Don’t just stuff tools and accessories haphazardly. Try to arrange them for easy access and better weight distribution.

Comparing leather tool belts

Occidental leather 5089

21 Best carpenters tool belts | Leather vs polyester? [2022] (32)

Occidental Leather 5093

21 Best carpenters tool belts | Leather vs polyester? [2022] (33)

Occidental Leather 5530

21 Best carpenters tool belts | Leather vs polyester? [2022] (34)

Occidental Leather 5191 LG Pro

21 Best carpenters tool belts | Leather vs polyester? [2022] (35)

Occidental Leather 8580

21 Best carpenters tool belts | Leather vs polyester? [2022] (36)

Occidental Leather 8089

21 Best carpenters tool belts | Leather vs polyester? [2022] (37)

Occidental Leather 9850

21 Best carpenters tool belts | Leather vs polyester? [2022] (38)

Occidental Leather 9855

21 Best carpenters tool belts | Leather vs polyester? [2022] (39)

Estwing 94746

21 Best carpenters tool belts | Leather vs polyester? [2022] (40)

OX Tools OX-P263604

21 Best carpenters tool belts | Leather vs polyester? [2022] (41)

DeWalt DG5472

21 Best carpenters tool belts | Leather vs polyester? [2022] (42)

Lautus 15 pockets

21 Best carpenters tool belts | Leather vs polyester? [2022] (43)

CLC 21448X

21 Best carpenters tool belts | Leather vs polyester? [2022] (44)

CLC 21448

21 Best carpenters tool belts | Leather vs polyester? [2022] (45)

Lautus 11 pockets

21 Best carpenters tool belts | Leather vs polyester? [2022] (46)

Leather Gold 3450

21 Best carpenters tool belts | Leather vs polyester? [2022] (47)

DeWalt DG617

21 Best carpenters tool belts | Leather vs polyester? [2022] (48)

Gatorback B145

21 Best carpenters tool belts | Leather vs polyester? [2022] (49)

CLC 2605

21 Best carpenters tool belts | Leather vs polyester? [2022] (50)

McGuire 5 pockets

21 Best carpenters tool belts | Leather vs polyester? [2022] (51)

Bucketboss 50200

21 Best carpenters tool belts | Leather vs polyester? [2022] (52)

CHECK CURRENT PRICECHECK CURRENT PRICECHECK CURRENT PRICECHECK CURRENT PRICECHECK CURRENT PRICE
Verdict:Top leather tool beltBest nylon-leather tool beltWise buy tool beltMost affordableTop polyester tool belt
Total pockets23252822282224241422121517151110201420512
Hammer loops222222113322322312122
Belt size29 inches to 54 inchesna36 inches to 39 inches34 inches to 56 inches29 inches to 54 inches29 inches to 54 inches32 inches to 41 inches32 inches to 41 inches30 inches to 52 inches29 inches to 37 inches29 inches to 46 inches30 inches to 56 inches47 inches to 55 inches29 inches to 46 inches30 inches to 46 inches30 inches to 45 inches29 inches to 46 inches36 inches to 40 inches29 inches to 46 inchesup to 50 inchesup to 52 inches
FastenerOne-tongue rollernaOne-tongue rollerOne-tongue rollerOne-tongue rollerOne-tongue rollerOne-tongue rollerOne-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerDouble-tongue rollerOne-tongue roller
MaterialTop grain leatherTop grain leatherTop grain leatherTop grain leatherTop grain leatherNylon, leatherNylon, leatherNylon, leatherTop grain leatherLeatherTop grain leatherTop grain leatherPolyester, leatherTop grain leatherGenuine leatherGenuine leatherNylon, polyesterNylon, leatherPolyesterOil tanned leatherPolyester

Our verdict: A premium leather tool belt

Occidental Leather 5089 is the highest quality tool belt you can buy or gift for your favorite builder.

The top-grain leather gives it the look and feel of a quality accessory and protects you and your clothes from sharp and pointed tools that inevitably poke out.

It has 22 pockets, so you can pretty much carry your entire tool collection with you if you wish.

I especially like the copper rivets reinforcing the bags, which ensure the belt’s ability to withstand the most rugged conditions.

If you’ve enjoyed this rundown of the best carpenter’s tool belts on the market, also check out my recommendation for woodworking aprons .

Videos

1. Top 5 Best Construction Tool Belts in 2021
(Pick The Tools)
2. Best Tool Belt For Framing: My Everyday Carry in 2019
(RR Buildings)
3. Top 5 Best Tool Belts Review in 2021
(Legend Handyman)
4. Top 5 Best Electrician Tool Belts in 2021
(Pick The Tools)
5. Top #5 Best Tools For Carpenters Reviews For You
(Gardenia)
6. Best Tool Belts for Framers 2022 - Top 5 Picks
(Better & Best Products)
Top Articles
Latest Posts
Article information

Author: Roderick King

Last Updated: 01/24/2023

Views: 6520

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Roderick King

Birthday: 1997-10-09

Address: 3782 Madge Knoll, East Dudley, MA 63913

Phone: +2521695290067

Job: Customer Sales Coordinator

Hobby: Gunsmithing, Embroidery, Parkour, Kitesurfing, Rock climbing, Sand art, Beekeeping

Introduction: My name is Roderick King, I am a cute, splendid, excited, perfect, gentle, funny, vivacious person who loves writing and wants to share my knowledge and understanding with you.